通过多种技术手段从芯片中提取关键信息，获取芯片内程序就叫芯片解密。邦凯长期提供各类IC解密、芯片解密、单片机解密、DSP解密、PLD解密、FPGA解密等技术服务，依靠17年IC芯片技术研究与解密技术攻关，目前研究所可对市场上常见的解密类型提供高质量解密服务，大部分解密可保证成功率100%。
　　有EP1K50解密需求者请与邦凯联系：

　　解密/加密/破解咨询热线：086-0755-83003639
　　E-mail：market2@pcblab.net

　　EP1K50 Feature：
　　Programmable logic devices (PLDs), providing low cost
　　system-on-a-programmable-chip (SOPC) integration in a single
　　device
　　– Enhanced embedded array for implementing megafunctions
　　such as efficient memory and specialized logic functions
　　– Dual-port capability with up to 16-bit width per embedded array
　　block (EAB)
　　– Logic array for general logic functions
　　High density
　　– 10,000 to 100,000 typical gates (see Table 1)
　　– Up to 49,152 RAM bits (4,096 bits per EAB, all of which can be
　　used without reducing logic capacity)
　　Cost-efficient programmable architecture for high-volume
　　applications
　　– Cost-optimized process
　　– Low cost solution for high-performance communications
　　applications
　　System-level features
　　– MultiVoltTM I/O pins can drive or be driven by 2.5-V, 3.3-V, or
　　5.0-V devices
　　– Low power consumption
　　– Bidirectional I/O performance (setup time [tSU] and clock-tooutput
　　delay [tCO]) up to 250 MHz
　　– Fully compliant with the peripheral component interconnect
　　Special Interest Group (PCI SIG) PCI Local Bus Specification,
　　Revision 2.2 for 3.3-V operation at 33 MHz or 66 MHz
　　– -1 speed grade devices are compliant with PCI Local Bus
　　Specification, Revision 2.2 for 5.0-V operation
　　– Built-in Joint Test Action Group (JTAG) boundary-scan test
　　(BST) circuitry compliant with IEEE Std. 1149.1-1990, available
　　without consuming additional device logic.
　　– Operate with a 2.5-V internal supply voltage
　　– In-circuit reconfigurability (ICR) via external configuration
　　devices, intelligent controller, or JTAG port
　　– ClockLockTM and ClockBoostTM options for reduced clock delay,
　　clock skew, and clock multiplication
　　– Built-in, low-skew clock distribution trees
　　– 100% functional testing of all devices; test vectors or scan chains
　　are not required
　　– Pull-up on I/O pins before and during configuration
　　Flexible interconnect
　　– FastTrack? Interconnect continuous routing structure for fast,
　　predictable interconnect delays
　　– Dedicated carry chain that implements arithmetic functions such
　　as fast adders, counters, and comparators (automatically used by
　　software tools and megafunctions)
　　– Dedicated cascade chain that implements high-speed,
　　high-fan-in logic functions (automatically used by software tools
　　and megafunctions)
　　– Tri-state emulation that implements internal tri-state buses
　　– Up to six global clock signals and four global clear signals
　　Powerful I/O pins
　　– Individual tri-state output enable control for each pin
　　– Open-drain option on each I/O pin
　　– Programmable output slew-rate control to reduce switching
　　noise
　　– Clamp to VCCIO user-selectable on a pin-by-pin basis
　　– Supports hot-socketing