ATtiny10单片机解密是ATMEL系列典型AVR单片机解密型号，邦凯从早期开始便独立进行ATMEL系列芯片解密技术研究，从简单的51单片机，到后来的AVR单片机，再到ATMEL新推出的AT88系列单片机，邦凯均已经实现了重大技术突破，且经过多次实践证明，我们在这一芯片解密领域的技术手法已经相当成熟，可以针对众多芯片提供高效可靠的解密方案，解密周期短、解密费用低、解密可靠性强。
　　以下是我们为方便客户及解密工程师对芯片进行技术理解和分析提供的ATtiny10单片机主要性能特征介绍，供大家参考借鉴，有ATtiny10单片机解密等ATTINY系列芯片解密需求者欢迎与邦凯联系咨询更多合作详情
　　24小时服务热线：086-0755-83003639
　　E-mail：market2@pcblab.net
　　The ATtiny10 is a low-power CMOS 8-bit microcontroller based on the AVR RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny10/11/12 achieves throughputs approaching 1 MIPS per MHz, allowing the system designer to optimize power consumption versus processing speed.
　　The AVR core combines a rich instruction set with 32 general-purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.
　　ATtiny10 Features
　　Utilizes the AVR? RISC Architecture
　　High-performance and Low-power 8-bit RISC Architecture
　　– 90 Powerful Instructions – Most Single Clock Cycle Execution
　　– 32 x 8 General Purpose Working Registers
　　– Up to 8 MIPS Throughput at 8 MHz
　　Nonvolatile Program and Data Memory
　　– 1K Byte of Flash Program Memory QuickFlash? One-time Programmable (ATtiny10)
　　In-System Programmable (ATtiny12)
　　Endurance: 1,000 Write/Erase Cycles (ATtiny11/12)
　　– 64 Bytes of In-System Programmable EEPROM Data Memory (ATtiny12)
　　Endurance: 100,000 Write/Erase Cycles
　　– Programming Lock for Flash Program and EEPROM Data Security
　　Peripheral Features
　　– Interrupt and Wake-up on Pin Change
　　– One 8-bit Timer/Counter with Separate Prescaler
　　– On-chip Analog Comparator
　　– Programmable Watchdog Timer with On-chip Oscillator
　　Special Microcontroller Features
　　– Low-power Idle and Power-down Modes
　　– External and Internal Interrupt Sources
　　– In-System Programmable via SPI Port (ATtiny12)
　　– Enhanced Power-on Reset Circuit (ATtiny12)
　　– Internal Calibrated RC Oscillator (ATtiny12)
　　Specification
　　– Low-power, High-speed CMOS Process Technology
　　– Fully Static Operation
　　Power Consumption at 4 MHz, 3V, 25°C
　　– Active: 2.2 mA
　　– Idle Mode: 0.5 mA
　　– Power-down Mode: <1 μA
　　Packages
　　– 8-pin PDIP and SOIC
　　ATtiny10 is the QuickFlash OTP Version of ATtiny11