ATtiny24单片机解密等ATMEL公司ATTINY系列单片机解密是邦凯芯片解密研究所目前已经成功破解的典型AVR单片机型号，针对ATTINY系列众多单片机，邦凯芯片解密研究所均能提供极具可靠性和经济价值的解密方案。
　　下面，我们提供对ATtiny24单片机的主要功能特征介绍，有ATtiny24单片机解密等ATMEL系列单片机解密需求者欢迎与邦凯芯片解密研究所联系咨询更多合作详情
　　24小时服务热线：086-0755-83003639
　　E-mail：market2@pcblab.net
　　The ATtiny24 is a low-power CMOS 8-bit microcontroller based on the AVR enhanced RISC architecture. By executing powerful instructions in a single clock cycle, the ATtiny24 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.
　　The AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.
　　ATtiny24 Features
　　High Performance, Low Power AVR 8-Bit Microcontroller
　　Advanced RISC Architecture
　　– 120 Powerful Instructions – Most Single Clock Cycle Execution
　　– 32 x 8 General Purpose Working Registers
　　– Fully Static Operation
　　Non-volatile Program and Data Memories
　　– 2/4/8K Byte of In-System Programmable Program Memory Flash (ATtiny24/44/84)
　　Endurance: 10,000 Write/Erase Cycles
　　– 128/256/512 Bytes In-System Programmable EEPROM (ATtiny24/44/84)
　　Endurance: 100,000 Write/Erase Cycles
　　– 128/256/512 Bytes Internal SRAM (ATtiny24/44/84)
　　– Programming Lock for Self-Programming Flash Program and EEPROM Data Security
　　Peripheral Features
　　– Two Timer/Counters, 8- and 16-bit counters with two PWM Channels on both
　　– 10-bit ADC
　　8 single-ended channels
　　12 differential ADC channel pairs with programmable gain (1x, 20x)
　　Temperature Measurement
　　– Programmable Watchdog Timer with Separate On-chip Oscillator
　　– On-chip Analog Comparator
　　– Universal Serial Interface
　　Special Microcontroller Features
　　– debugWIRE On-chip Debug System
　　– In-System Programmable via SPI Port
　　– External and Internal Interrupt Sources
　　– Pin Change Interrupt on 12 pins
　　– Low Power Idle, ADC Noise Reduction, Standby and Power-down Modes
　　– Enhanced Power-on Reset Circuit
　　– Programmable Brown-out Detection Circuit
　　– Internal Calibrated Oscillator
　　– On-chip Temperature Sensor
　　I/O and Packages
　　– 14-pin SOIC, PDIP and 20-pin QFN/MLF: Twelve Programmable I/O Lines
　　Operating Voltage:
　　– 1.8 - 5.5V for ATtiny24V/44V/84V
　　– 2.7 - 5.5V for ATtiny24/44/84
　　Speed Grade
　　– ATtiny24V/44V/84V: 0 - 4 MHz @ 1.8 - 5.5V, 0 - 10 MHz @ 2.7 - 5.5V
　　– ATtiny24/44/84: 0 - 10 MHz @ 2.7 - 5.5V, 0 - 20 MHz @ 4.5 - 5.5V
　　Industrial Temperature Range
　　Low Power Consumption
　　– Active Mode:
　　1 MHz, 1.8V: 380 μA
　　– Power-down Mode:
　　1.8V: 100 nA